13 Liquid Handling n email: export@alphalabs.co.uk Nanoject III Autoinjector Nanoject™ III Programmable Nanolitre Injector The Drummond Programmable Nanoject™ III Nanolitre Injector is designed for meticulous injection procedures into cellular models such as oocytes and embryos with delicate membranes. It offers a number of state-of-the-art features to provide easy setup and operation as well as more accurate injection volumes down to 0.6 nanolitres. Potential applications have been expanded with the introduction of a user-friendly, fully programmable touchscreen located on the control box. The intuitive touchscreen enables prompted input and execution of tasks. The operational modes enable the user to program the unit to do single manual injections, as well as multiple injection cycle recipes. The program recipes are automatically saved and labelled in sequential order. Programmability, the lower injection volume capability plus the user’s ability to select the injection rate widens the potential range of applications for the Nanoject III. The Nanoject III does not use any O-rings to secure the micropipette. Instead, a small chuck and a silicon receiver have been incorporated for the glass micropipette. The proven hydraulic technology ensures: ■ Lower injection volumes ■ User selected injection rate ■ Accurate and consistent injection The Universal Power Source provides adapter plugs to enable the unit to be used in the UK, US, Europe and Australia simply by inserting the proper plug. ■ Manual Mode Enables the user to manually fill and empty the micropipette ■ Inject Mode Used to do single or multiple manual injections. The user can program an injection volume between 0.6 and 999.9nL, and an injection rate in nL/sec. ■ Program Mode Enables the user to program multiple injection cycle recipes. The Recipes are automatically saved and labelled in sequential order ■ Set-Up mode Enables the user to program and store the manual fill and empty rates. The fill and empty speeds are programmed separately to the injection rate. Specifications Power Source 100/240 volt, 50/60 Hz Total Sample Volume 4.2 µL Fill / Empty Volume Speed 10 - 200 nL/sec Injection Volume Range 0.6 - 999.9 nL Injection Rate 10 - 200 nL/sec Plunger Travel 23 mm Glass Micropipette Dimensions OD 0.045˝ (1.14 mm), ID 0.021˝ (0.53 mm) Operating Modes The Nanoject™ III Programmable Nanolitre Injector kit includes the following components: ■ The control box and power source ■ Injector ■ Injector head cable ■ Vial of 100 3.5˝ glass capillaries ■ Vial of 100 7˝ glass capillaries ■ Backfilling needle ■ Universal adapter Nanoject™ III Programmable Nanolitre Injector Catalogue Number Description 3-000-207 Nanoject III Kit 100-240 volts 3-000-032 Foot Switch (remote capability for fill, empty and inject functions) Supplied with universal adaptor for easy mounting For accessories, please see next page.
RkJQdWJsaXNoZXIy MTUyODc1Mw==