Laboratory Equipment - Electrophoresis 16 n web: www.alphalabs.co.uk Electrophoresis - DNA Sequencing Technical Specifications Unit dimensions (W x H x D) 36 x 33 x 18cm Unit dimensions (W x L) 30 x 22cm Gel dimensions (W x L) 28 x 20cm Max. sample 300 samples per run; 75 samples per gel Buffer volume Min 1800ml, Max 8400ml Combs available No. of samples 1, 2, 4, 28MC, 56MC, 75 Thickness 0.25, 0.35, 0.5, 1, 1.5, 2.0mm Technical Specifications Plate dimensions (W x L) EL2560 20 x 50cm EL2580 33 x 45cm Max. sample capacity EL2560 48 samples EL2580 96 samples Buffer volume EL2560 Min 500ml, Max 1000ml EL2580 Min 800ml, Max 2000ml Combs available: No. of teeth 24, 48, 80, 96 Thicknesses 0.25, 0.35, 1, 1.5mm Maxi Plus for Second Stage 2-D The 26cm active gel width provides a large gel area to resolve large IEF strips. In combination with the IEF system, this offers a complete package for 2-D electrophoresis. The unit utilises the Clarit-E advanced design features to provide convenient ease of use with high resolution separations. Rapid set up cooling retains resolution in extended separations and also saves on buffer volume without affecting run quality. Four gels can be resolved per run. A wide range of accessories are available to allow easy transition between 2-D and standard vertical electrophoresis techniques. In particular different types of 2-D comb allow a wide degree of versatility in sample selection and gel set-up. DNA Sequencing Unit n Run up to 96 samples n Enhanced gel heat homogenisation n Variable low or high buffer volumes n 20 x 50cm or 33 x 45cm formats Typical application: DNA Sequencing, 2-D analysis, Micro-satellite analysis, DNA fingerprinting, Gel shift assays, Single-Strand Conformation Polymorphism (SSCP), Heteroduplex and Oligonucleotide analysis. Ideal for a variety of large format vertical gel applications, these units offer advanced features for enhancing gel resolution and ease of use, essential when handling gels of this size. Each unit contains ultra soft silicone seals for easy plate sealing and trouble-free runs, even over extended run times. Resolution is enhanced by using an aluminium heat sink plate, which is essential for even sample migration. Added convenience is provided by a removable lower buffer tank and upper buffer drainage tap. Special buffer chambers allow either low buffer volumes to be used for economy or high buffer volumes to be used for extended runs. A wide range of interchangeable comb and spacer options allows a large number of techniques to be easily accomplished. Maxi Plus for Second Stage 2-D Catalogue Number Description EL2390 Maxi Plus, 30 x 22cm Dual with Glass plates & bonded 1.5mm spacers, 2 x 28 sample combs, 2 combs, cooling pack, dummy plate EL2395 Maxi Plus, 30 x 22cm Dual with Glass plates & bonded 1.5mm spacers, 2 x 28 sample combs, 2 combs, cooling pack, dummy plate & casting base EL2334 Maxi Plus Blot Insert - includes 3 cassettes and 6 fibre pads EL2318 Dual Caster - Maxi Plus DNA Sequencing Unit Catalogue Number Description EL2560 DNA Sequencing Unit, 20cm wide, Glass plates, 0.35mm spacers, 48 sample comb EL2580 DNA Sequencing Unit, 33cm wide, Glass plates, 0.35mm spacers, 48 sample comb EL2594 Fan heater Sensor Lit for DNA Sequencing Unit EL2560 & EL2580
RkJQdWJsaXNoZXIy MTUyODc1Mw==